1 / 5
USED AUTOMATIC EDGE BANDING MACHINE — MODEL CHA-802
درهم 3,500
تفاصيل السلعة
الحالة
جيدة مع وجود تلف بسيط
مدى الإستخدام
تم الاستخدام باعتدال
تم النشر بتاريخ: 8 يوليو 2026
الوصف
USED AUTOMATIC EDGE BANDING MACHINE — MODEL CHA-802
Type: Semi-automatic straight-line edge banding machine
Origin: China
Model: CHA-802
FUNCTION
Applies PVC/melamine edge banding tape to the cut edges of MDF, particleboard, and plywood panels. Commonly used in furniture, cabinet, and door manufacturing. The machine performs edge banding (glue + tape application), automatic end-trimming (flush-trims banding at both ends of the panel), and double-side trimming (trims top/bottom overhang for a clean finish).
KEY FEATURES
Straight-line roller feed table (hand-fed), with pressure/feed rollers along the full working length
Glue pot and banding application unit with hand-crank height adjustment for panel thickness
Multiple in-line cutter/trim stations with rotary cutter wheels
Separate freestanding electrical control box with start/stop buttons, dual-zone temperature controllers (glue pot heating, adjustable, seen set around 55-60°C), and indicator lights
Rear support/discharge table
Compact single-sided design — panels are manually fed and flipped for each edge
SPECIFICATIONS (estimated, please verify on-site before finalizing)
Feed type: Manual, straight-line roller feed
Glue type: Hot melt (EVA), heated glue pot
Glue pot temperature range: approx. 0-200°C (working point seen around 55-60°C)
Banding thickness capacity: approx. 0.4-3 mm
Panel thickness capacity: approx. 10-50 mm
Feed speed: approx. 10-18 m/min
Power supply: 380V, 3-phase, 50Hz
Total installed power: approx. 2-3 kW
Condition: Used, functional
Type: Semi-automatic straight-line edge banding machine
Origin: China
Model: CHA-802
FUNCTION
Applies PVC/melamine edge banding tape to the cut edges of MDF, particleboard, and plywood panels. Commonly used in furniture, cabinet, and door manufacturing. The machine performs edge banding (glue + tape application), automatic end-trimming (flush-trims banding at both ends of the panel), and double-side trimming (trims top/bottom overhang for a clean finish).
KEY FEATURES
Straight-line roller feed table (hand-fed), with pressure/feed rollers along the full working length
Glue pot and banding application unit with hand-crank height adjustment for panel thickness
Multiple in-line cutter/trim stations with rotary cutter wheels
Separate freestanding electrical control box with start/stop buttons, dual-zone temperature controllers (glue pot heating, adjustable, seen set around 55-60°C), and indicator lights
Rear support/discharge table
Compact single-sided design — panels are manually fed and flipped for each edge
SPECIFICATIONS (estimated, please verify on-site before finalizing)
Feed type: Manual, straight-line roller feed
Glue type: Hot melt (EVA), heated glue pot
Glue pot temperature range: approx. 0-200°C (working point seen around 55-60°C)
Banding thickness capacity: approx. 0.4-3 mm
Panel thickness capacity: approx. 10-50 mm
Feed speed: approx. 10-18 m/min
Power supply: 380V, 3-phase, 50Hz
Total installed power: approx. 2-3 kW
Condition: Used, functional
منطقة
مجمع دبي للاستثمار 1, مجمع دبي للاستثمار, دبي, الإمارات
- المحاسبة / المالية
- السيارات
- الصحة والجمال
- التنظيف /التدبير المنزلي
- الإنشاءات
- شيف / طباخ
- خدمة العملاء / مركز الإتصال
- إدارة وتحليل البيانات
- التصميم
- سائق / توصيل
- تعليم
- هندسة
- إدارة الفعاليات والمناسبات
- عامل / فنّي
- الموارد البشرية - الإدارة
- تكنولوجيا المعلومات
- خدمات قانونية
- خدمات لوجستية و توزيع
- التصنيع / التخزين
- كابتن بحري / بحار
- التسويق/الإعلان
- الاعلام,الفنون والترفيه
- الطب / الرعاية الصحية
- عقارات
- تشغيل المطاعم
- المبيعات / تطوير الأعمال
- السكرتارية / المكتب الأمامي
- الأمن /الحماية
- رياضة و لياقة
- السفروالضيافة
- أخرى
- يبحث عن عمل
English