1 / 7
Bang and Olufsen Beolab 11 Subwoofers - set of 2
درهم 6,999
تفاصيل السلعة
العلامة التجارية
بانج أند أولوفسن
تكنولوجيا الاتصال
سلكي
الميزات
اقتران استريو
العمر
10 سنوات وأكثر
ضمان
لا
الحالة
جيدة مع وجود تلف بسيط
مدى الإستخدام
تم الاستخدام باعتدال
اسم النموذج
BEOLAB11
طريقة التحكم
تحكم عن بُعد
اللون
فضي
تم النشر بتاريخ: 6 مايو 2026
الوصف
Due to changing familial circumstances, we are selling these 2 stylish high-end subwoofers from bang & olufsen. Only Sold together.
Works great, looks great, just as shown in pictures have a few cosmetic issues. Power cables have been misplaced during move to new home so they come without, but have lowered price to compensate.
Purchased 2013/2014
1st owner
New price for EACH subwoofer was,- AED 8499
As you can see 1 of them has a wall mount attached but not 100% if all parts for it are accounted for after moving but will give it for free with the subwoofers.
Have several other B&o speakers, subwoofers, TV's etc for sale too. (see last picture for some of them)
Can be viewed and picked up from Dubai Marina
ABOUT THE BANG/OLUFSEN BEOLAB 11 SUBWOOFER:
OVERVIEW:
Beolab 11 utilises a design principle seen in other subwoofers of having identical units firing in opposite directions and hence making the structure more stable. Indeed the B&W PV1 does just this using B&O ICE amplification.
B&O however have added a new twist to the equation by having the two 130mm drive units firing inwardly and so allowing the external casing to be made from the same polished aluminium seen in the Beovision 10.
Amplification is via a 250W ICE unit and so the speaker can be seen to fit below the Beolab 2 in the range.
Mounting Options:
As a result of the balanced drive units, the Beolab 11 will be offered both as a floor standing model and with a wall bracket. This is again designed to match the Beovision 10. The Beovision 10 in both 40″ and 46″ versions is designed so that it can be used as a stand alone set but still utilise the subwoofer output.
The cross over frequency and bass lift is set with a collection of switches on the base. There is a Powerlink connection and two Powerlink outputs so it can be used in a stereo system.
TECHNICAL SPECIFICATION:
POWER AMPLIFIERS: 200W, Class D, ICEpower
EFFECTIVE FREQUENCY RANGE: Lower cut-off frequency (-10dB) = 33Hz
CABINET PRINCIPLE: 2 separate sealed boxes, Acoustic Balance principle
CABINET VOLUME: 2 x 2.5 litres
BASS DRIVER: 2 x 6.5 inch cone
FEATURES: Adaptive Bass Linearisation (ABL), Input Sensitivity switch, Room Adaptation switch, Thermal Protection
CONNECTIONS: 1 x PowerLink 8-pin DIN input, 2 x PowerLink 8-pin DIN outputs
ACCESSORIES: Wall Bracket
DIMENSIONS (W x H x D): 23.8 x 30.8 x 22.7cm (Floor) / 23.8 x 31.5 x 23.6cm (Wall)
WEIGHT: 7.3kg
Works great, looks great, just as shown in pictures have a few cosmetic issues. Power cables have been misplaced during move to new home so they come without, but have lowered price to compensate.
Purchased 2013/2014
1st owner
New price for EACH subwoofer was,- AED 8499
As you can see 1 of them has a wall mount attached but not 100% if all parts for it are accounted for after moving but will give it for free with the subwoofers.
Have several other B&o speakers, subwoofers, TV's etc for sale too. (see last picture for some of them)
Can be viewed and picked up from Dubai Marina
ABOUT THE BANG/OLUFSEN BEOLAB 11 SUBWOOFER:
OVERVIEW:
Beolab 11 utilises a design principle seen in other subwoofers of having identical units firing in opposite directions and hence making the structure more stable. Indeed the B&W PV1 does just this using B&O ICE amplification.
B&O however have added a new twist to the equation by having the two 130mm drive units firing inwardly and so allowing the external casing to be made from the same polished aluminium seen in the Beovision 10.
Amplification is via a 250W ICE unit and so the speaker can be seen to fit below the Beolab 2 in the range.
Mounting Options:
As a result of the balanced drive units, the Beolab 11 will be offered both as a floor standing model and with a wall bracket. This is again designed to match the Beovision 10. The Beovision 10 in both 40″ and 46″ versions is designed so that it can be used as a stand alone set but still utilise the subwoofer output.
The cross over frequency and bass lift is set with a collection of switches on the base. There is a Powerlink connection and two Powerlink outputs so it can be used in a stereo system.
TECHNICAL SPECIFICATION:
POWER AMPLIFIERS: 200W, Class D, ICEpower
EFFECTIVE FREQUENCY RANGE: Lower cut-off frequency (-10dB) = 33Hz
CABINET PRINCIPLE: 2 separate sealed boxes, Acoustic Balance principle
CABINET VOLUME: 2 x 2.5 litres
BASS DRIVER: 2 x 6.5 inch cone
FEATURES: Adaptive Bass Linearisation (ABL), Input Sensitivity switch, Room Adaptation switch, Thermal Protection
CONNECTIONS: 1 x PowerLink 8-pin DIN input, 2 x PowerLink 8-pin DIN outputs
ACCESSORIES: Wall Bracket
DIMENSIONS (W x H x D): 23.8 x 30.8 x 22.7cm (Floor) / 23.8 x 31.5 x 23.6cm (Wall)
WEIGHT: 7.3kg
منطقة
دبي مارينا, دبي, الإمارات
- المحاسبة / المالية
- السيارات
- الصحة والجمال
- التنظيف /التدبير المنزلي
- الإنشاءات
- شيف / طباخ
- خدمة العملاء / مركز الإتصال
- إدارة وتحليل البيانات
- التصميم
- سائق / توصيل
- تعليم
- هندسة
- إدارة الفعاليات والمناسبات
- عامل / فنّي
- الموارد البشرية - الإدارة
- تكنولوجيا المعلومات
- خدمات قانونية
- خدمات لوجستية و توزيع
- التصنيع / التخزين
- كابتن بحري / بحار
- التسويق/الإعلان
- الاعلام,الفنون والترفيه
- الطب / الرعاية الصحية
- عقارات
- تشغيل المطاعم
- المبيعات / تطوير الأعمال
- السكرتارية / المكتب الأمامي
- الأمن /الحماية
- رياضة و لياقة
- السفروالضيافة
- أخرى
- يبحث عن عمل
English